The MASTER AC 24 AIR CONDITIONER (by Dantherm) is a transportable and affordable AC unit developed for the use by expeditionary units operating on a tight budget. The Master AC 24 is designed for placement outside with supply air and return air ducted to the tent (Ø315 mm). The function of the Master AC 24 is based on a cooling circuit and two powerful centrifugal fans. The lower section contains the evaporator and evaporator fan and draws outside or recirculated air through the cold evaporator coil and supplies the cooled air through the discharge into the tent. The upper section of the unit houses the condenser fan and condenser coil and returns the heat taken from the cooled air to the outside.

About Product

asy air ducting with diffusing flex tubes
Cabinet from 0.9 – 2.5 mm galvanized and powder coated steel sheet
Top finish painting is pure white, RAL 9010
Cooling at outside temperatures up to + 55°C
Environmentally friendly R134a refrigerant
High/low pressure switch ensuring a long compressor lifespan
The unit connects to the mains power supply or to a separate
diesel generator via a 10 m power cable with a CEE plug
Temperature control carried out by a room thermostat
hard-wired to the air-conditioner
Inlet and discharge openings for Ø 31 mm flexible tubes
Easy transportation by either forklift or on the four,
mounted wheels (accessory)
Setup and operation can be done by a single person
Ductable with flex tubes or air distribution duct
Easy air recirculation


Air displacement:
2.180 m3/h
Operating temperature range, cooling:
20 – 55 °C
Cooling capacity @ 49/49°C 30% RH:
6.0 / 20400 kW/BTU
Power supply:

230/50 V/Hz

Max. current:

16 A

Locked rotor amperage (LRA):

46 A

Product size (l x w x h):

1110 x 919 x 753 mm



Max. system pressure:

25 bar


160 kg

Flexible tubes 3 m – 097754

Air distribution duct 5 m – 097756

Lifting handles and wheel set – 096673

2 extra handles for 2-man lift – 093894

Duct-tie set, 3 pcs. – 098108