Intended for domestic mechanical ventilation
The low profile plenum boxes require less installation space than standard solutions, which is very convenient when they should not be prominent once concealed. This advantage helps free up usable indoor areas.
FLX-PLO plenum boxes are made of galvanized steel sheet. Plenum boxes made from stainless steel are available on request.
FLX-PRO-63-1-d1
FLX-PRO-63-2-d1
FLX-PRO-63-3-d1
FLX-PLO-75-1-d
FLX-PLO / FLX-PRO plenum boxes are components of the FLX-REKU system intended for domestic mechanical ventilation
systems, also known as mechanical ventilation heat recovery (MVHR) or heat recovery ventilation.
The low profile plenum boxes require less installation space than standard solutions, which is very convenient when they
should not be prominent once concealed. This advantage helps free up usable indoor area.
FLX-PLO plenum boxes are made of galvanized steel sheet. Plenum boxes made from stainless steel are available on
request.
Available also insulated plenum box version – FLX-PLI and FLX-PRI. These plenum boxes have inside an insulation lining made from 9 mm thick rubber foam. FLX-PLO plenum boxes are equipped with duct connection spigot Ød2 with an EPDM seal – this type of connection with FLX-HDPE ducting is airtight and easy to install.
The FLX-PLO-EPP-F plenum boxes are part of the FLX-REKU air distribution system designed for domestic mechanical ventilation systems, so-called the MVHR system, to which an air valve and FLX-HDPE / FLX-HDPE-A ducts with a diameter of Ø75 are mounted.
Due to their small size, they do not require much space or special installation. This allows achieving a larger usable floor area of the room.
The FLX-PLO-EPP-F plenum boxes are made of expanded polypropylene, i.e. EPP, while Ø75 spigots are made of ABS.
The material used allows obtaining an aerodynamic shape of the inside of the box which leads to low air resistance.
Download Brochure